ElectraStim Flux Dual-Output E‑Stim Unit
€358.99
ElectraStim Flux Dual-Output E‑Stim Unit
- For couples
- Rechargeable
E-stim unit with two outputs, 99 intensity levels and 6 play modes. You can change the stimulation by flicking it, tilting it, with sound from its microphone or with music through a 3.5 mm jack. It comes with adhesive pads and uses 2 mm pin connections.
Orders start at — add more to check out.
Your parcel arrives in a plain box and the sender does not mention Loviux
ElectraStim Flux Move it and change the sensation.
A built-in accelerometer reads how you move the Flux. Flick it and it sends a burst of intensity to the attachment, tilt it and it adjusts the level. It also responds to sound or music you connect, and its OLED screen shows the mode, the intensity and the battery.
- 2 outputs
- 99 levels
- 6 modes
- Rechargeable
The essentials
ElectraStim Flux: what you need to know before you buy
Is it for you?
Who the ElectraStim Flux is for, and who it isn't
It suits you if…
- You want to control e-stim by moving the unit in your hand.
- You want the stimulation to respond to music or to sounds in the room.
- You already have electrodes with 2 mm pins and want a unit with two outputs.
- You want to see the intensity, mode and battery on screen while you play.
Better look elsewhere if…
- You have a pacemaker. E-stim is not for you.
- You want an insertable toy that is ready to use. It only comes with adhesive pads, and the unit uses 2 mm pin connections.
- You prefer something with no settings to tweak. It has 6 modes with more than 40 variations and 99 levels, best explored slowly.
Our usage tips
How to use the ElectraStim Flux
- Charge it before first use. It takes under an hour to go from 0 to 80%.
- Connect the adhesive pads that come with it, or an accessory with a 2 mm pin, with the unit switched off.
- Start with the intensity at its lowest and turn it up slowly. The OLED screen shows the level and the mode.
- Choose the mode. In Flick, flick the unit with a snap of the wrist, like cracking a whip. In Tilt, tilt it to adjust the sensation. In Microphone, it responds to sounds and voice. In Line-In, connect an audio source with a 3.5 mm headphone jack.
- Turn on Zero Override if you don't want the intensity to drop back to zero each time you change mode.
Cleaning
Wipe the unit with a dry cloth. Store it in its box, away from heat and sunlight.
Our tips
- Do not use it above the waist or if you have a pacemaker.
- Switch the unit off before connecting, disconnecting or moving the electrodes.
- Do not place the pads on irritated or broken skin.
- If you feel pain or burning, or your skin turns red, stop.
- Do not get the unit wet.
- Agree a signal to stop, and do not leave the person wearing the electrodes alone.
In the box
What's in the box
- ElectraStim Flux e-stim unit
- Adhesive e-stim pads
Specifications
ElectraStim Flux specifications
- Type
- E-stim unit
- Outputs
- 2 (dual output)
- Intensity levels
- 99
- Play modes
- 6, with more than 40 variations
- Modes
- Wave, Pulse, Flick, Tilt, Microphone and Line-In
- Motion control
- Built-in accelerometer (Flick and Tilt)
- Sound control
- Built-in microphone and line input, with stereo digital processing
- Audio input
- 3.5 mm headphone jack
- Screen
- OLED
- Zero Override
- Intensity does not drop to zero when you change mode
- Battery
- Lithium-ion, rechargeable
- Charging
- 0 to 80% in under an hour
- Connections
- 2 mm pin
- Includes
- Adhesive pads
- Brand
- ElectraStim
Questions
ElectraStim Flux: frequently asked questions
What comes with the ElectraStim Flux to get started?
Adhesive e-stim pads. The unit uses 2 mm pin connections.
Can you connect music to the ElectraStim Flux?
Yes. Use Line-In mode with any source that has a 3.5 mm headphone jack. There is also a Microphone mode that responds to sounds and voice.
How many modes and intensity levels does the ElectraStim Flux have?
6 play modes with more than 40 variations and 99 intensity levels. The modes are Wave, Pulse, Flick, Tilt, Microphone and Line-In.
How does Flick mode work on the ElectraStim Flux?
You flick the unit with a snap of the wrist and it sends a burst of intensity to the connected accessory. A built-in accelerometer detects it, the same one Tilt mode uses when you tilt the unit.
How long does the ElectraStim Flux take to charge?
0 to 80% in under an hour. It has a rechargeable lithium-ion battery.
Does the ElectraStim Flux intensity go back to zero when you change mode?
Not if you turn on Zero Override. With that option, the stimulation stays the same when you switch from one mode to another.
Can you get the ElectraStim Flux wet?
We have no confirmed water resistance rating for it, so it is best not to get it wet. To clean it, a dry cloth is enough.
Before publishing this product sheet we check that every figure is in its sources and that what it says holds up. Product sheets that do not pass this check are not published. How we verify information ›
Product sheet updated on 26 October 2026
Questions & Answers
Missing a detail? Ask us and we will answer you by email.
Ask a Question About This Product
Missing a detail?
Ask us and we will answer you by email.
Reviews
How our reviews work
- We ask customers who bought the product for their opinion once they have received their order.
- Anyone can also leave a review with the form. Every review is checked by hand before it is published, and we do not remove a review for being negative.
- Customer photos are checked one by one before they are published.
- Some reviews were written in another of our stores and are shown machine-translated.
This product appears in these guides
Related Products
